Edelbrock Automobile Parts Victor Series User Manual

EDELBROCK VICTOR SERIES DRAG RACE HEADERS

Catalog #6551

KIT CONTENTS

Qty.

❑ 1

❑ 2

❑ 16

❑ 2

❑ 4

❑ 2

❑ 8

❑ 16

Part #

Description

25-9492 Left Side Header

25-9493 Right Side Header

25-9494 Slip-on Merge Collector

36-0710 3/8” - 16 x 1” Header Bolts (Header Flange)

52-9711 O2 Sensor Bungs (SS)

54-6550 Header Port Flange Gaskets (Fel-Pro)

60-8541 5/16”-18 Grade C Lock Nuts (Collector)

68-6550 5/16”-18 x 1-1/2” Grade 8 Hex Bolt (Collector)

79-9719 Evacuation Tubes (SS)

79-9720 Collector Mounting Tabs (SS)

82-3600 5/16” AN Washers (Collector)

82-5590 3/8” Split Lock Washers (Header Flange)

EXHAUST FLOW

As the exhaust flow passes by the

tube, it creates a low pressure

area on the backside, which

translate into vacuum.

Note: Your Edelbrock Victor Series Race Headers include stainless steel evacuation tubes, O2 sensor bungs and collector

mounting tabs to be installed, if needed. Collector mounting tabs should be installed after primary tube tuning has been

completed. Evacuation tubes can be positioned on the collector where desired for best fit and hose routing. See the above

diagram for recommended installation.

Edelbrock Corporation, 2700 California Street, Torrance, CA 90503

Toll-Free Tech Line: 1-800-416-8628

Office: 310-781-2222

Rev. 4/07 - DA/mc